BSD AI Camera for Commercial Vehicle Blind Spot Detection
This BSD AI camera is developed for vehicle safety applications where drivers need better awareness of blind spot areas. The camera can support pedestrian and vehicle detection and can be connected with compatible monitors, warning alarms or MDVR systems depending on the project configuration.
It is suitable for trucks, buses, forklifts, construction vehicles and other commercial vehicles that operate near pedestrians, cyclists, loading areas or warehouse traffic.
https://youtu.be/uSOhYZHc8FM?si=8_E464fjEjUSvlnc
| 720P AI CAMERA SPECIFICATION | ||
| Image Device | 1/3” CMOS | |
| Frame Rate | 25 FPS | |
| Effective Pixels | 1280 (H) x 720 (V) | |
| Pixel Size | 3.75 μm x 3.75 μm | |
| Scanning System | Progressive Scanning | |
| Sync. System | Internal | |
| Resolution | 720P | |
| Video Output | 1.0Vp-p, 75Ohm | |
| Gamma Consumption | 0.45 | |
| Detected Distance | 8-10m | |
| AGC | Auto | |
| Dynamic rang | 83dB | |
| White Balance | Auto | |
| Electronic Shutter | 1/25 ～1/50,000 Seconds | |
| BLC | Auto | |
| Operating Temperature | –20℃ ~ 70℃, RH95%MAX. | |
| Storage Temperature | –40℃ ~ 80℃, RH95%MAX. | |
| Power Supply | DC12-32V | |
| Waterproof rating | IP69K | |
| Viewing Angle | 135°/ 150° | |
| Audio | Yes | |
AI Detection Applications
Truck Blind Spot Monitoring
Installed on the side of trucks or commercial vehicles, the BSD AI camera helps monitor blind areas where pedestrians, cyclists or nearby vehicles may appear. It can be used as part of a side-view warning system for urban logistics, fleet retrofit and commercial vehicle safety projects.
Bus and Coach Safety Monitoring
For buses and coaches, the camera can support side blind spot awareness and low-speed maneuvering safety. It can be combined with a monitor to help drivers check surrounding traffic before turning, stopping or entering busy areas.
Forklift and Industrial Vehicle Safety
For forklifts and industrial vehicles, the camera can help operators become more aware of pedestrians and vehicles around the work area. For warehouse projects, it can be combined with Xinvisual forklift camera solutions for rear view, fork view or pedestrian detection applications.
Fleet Safety Upgrades
When combined with vehicle monitors, MDVR systems or warning devices, the BSD AI camera can become part of a wider fleet safety camera system. This is useful for distributors, fleet operators and OEM engineers who need configurable camera and monitoring components.
Recommended System Combinations
| Application | Recommended Combination | Buyer Value |
|---|---|---|
| Truck side blind spot | BSD AI camera + vehicle monitor + warning alarm | Helps drivers monitor side blind areas and nearby road users. |
| Bus or coach safety | BSD AI camera + dashboard monitor | Supports surrounding awareness during turns, stops and low-speed movement. |
| Forklift warehouse safety | BSD AI camera + AI monitor + forklift camera system | Helps improve awareness around pedestrians, pallets and loading zones. |
| Fleet recording project | BSD AI camera + MDVR + vehicle cameras | Supports video recording and system-level fleet monitoring. |
BSIS / MOIS-Style Application Note
This product can be used as a safety system component for blind spot detection applications. For European truck and fleet projects, it may support BSIS/MOIS-style safety system designs when combined with suitable monitors, warning logic and installation configuration.
Xinvisual does not claim this camera alone is certified for any specific regulation. Final compliance depends on the complete vehicle system design, installation position, configuration and local approval requirements.
Buyer Checklist
- Vehicle type: truck, bus, forklift, trailer or industrial vehicle
- Detection target: pedestrian, cyclist, vehicle or mixed traffic
- Installation position: side, rear, front or forklift body
- Monitor or MDVR connection requirement
- Voltage, connector and cable requirements
- Alarm output and warning sound requirement
- OEM housing, bracket or cable customization needs
Related Solutions and Products
For a complete blind spot monitoring package, see the AI Blind Spot Detection Camera Solution.
For warehouse vehicle applications, see the Forklift Safety Camera Solution.
For fleet recording projects, see the Fleet Camera Monitoring Solution and Xinvisual 1080P 4G Hard Disk MDVR System.
For European and UK safety terminology, read the DVS / BSIS / MOIS Camera System Guide.
FAQ
What is a BSD AI camera?
A BSD AI camera is a vehicle camera designed to help detect pedestrians, vehicles or other road users in blind spot areas. It is normally used with a monitor, warning device or vehicle safety system.
Can this camera be used for trucks and buses?
Yes. It can be installed on trucks, buses, coaches and other commercial vehicles depending on the required detection area, viewing angle and system configuration.
Can it be used on forklifts?
Yes. For forklift safety applications, the camera can support pedestrian awareness or blind spot monitoring when combined with a suitable monitor and installation setup.
Is this a certified BSIS or MOIS camera?
This page does not claim certified compliance. The camera can be used as a safety system component for BSIS/MOIS-style blind spot detection applications. Final compliance depends on the complete system, installation and approval requirements.
Can Xinvisual provide OEM customization?
Yes. Xinvisual can support OEM/ODM requirements such as housing, connector, cable, bracket, monitor combination and system configuration based on project needs.
